Wireless problems in Lenovo® ThinkCentre M90p Tower PC
What are the various issues with the wireless network in Lenovo ThinkCentre M90p Tower PC?
The Lenovo ThinkCentre M90p Tower PC comes with the Intel Core i5 processor, 2 GB DDR3 RAM and 160 GB hard drive. The system is having integrated video for visual effects. For supporting the network connectivity, the system is equipped with the network adapter. With the use of this wireless adapter you could create personal area network and also able to connect your system to the Internet. Chances for errors are high when you connect the wireless network adapter in your computer to a wired broadband Internet connection. Sometimes you might get errors messages like “No Connectivity”, “Accessing is denied” when you try to connect to the network. In certain situations you might suffer from repeated disconnection problems or your system does not detect network adapter device.
Some of the tips to resolve wireless problems in the Lenovo ThinkCentre M90p Tower PC are described below.
- Reinstall Network Adapter Driver
- Verify Network Settings
- Remove the virus from access points and computer
Reinstall Network Adapter Driver
One of the main reasons for not detecting network adapter in your computer system is the corruption in its driver software. You can verify this by checking the Device Manager. If the network adapter in the system is marked with a red cross on it or its name is not appearing in the hardware list, then you need to reinstall the network adapter driver in the Lenovo ThinkCentre M90p Tower PC.
Verify Network Settings
You need to provide right SSID and WEP keys for getting network access. If there is any change in these keys, the ISP would deny the network access permission. SSID is the identifying code of the network to which you need to connect your computer. You also need to properly enter the correct user name and password for accessing the network.
There might be a virus in your computer or access points that might lead to breakage of the communication link. You could rectify the breakage in communication link by performing the communication test. Any breakage would indicate malware infection on the access points. You need to remove the virus by running a virus removal tool. You should make sure that your system is also free from viruses, otherwise it would create unwanted problems while using the Internet.